Bogen CAM8PRO Bedienungsanleitung PDF herunterladen

Accessories

Signal-Processing Modules

When signal-processing output modules are

installed into the Power Vector's last

two module bays, they automatically insert

themselves into the mix bus signal path lead-

ing to the power amplifier stage. When two of

these output modules are installed, their ef-

fects are cascaded with the second to last

bay's module processing the signal first and

then passing it to the module in the last bay.

Two benefits are gained by this innovation: (1)

the effects insert jacks are still available for

use by external processing equipment, (2) the

signal-processing output modules act on the

raw mix bus signal before any other user con-

trols, like master volume, bass, and treble.

This then ensures that signal level dependent

processors, such as the CMP1R Compressor/

Limiter and the ANS1R Ambient

Noise

Sensor modules, perform as intended

regard-

less of front panel master control changes.

Remote Volume Control

The master volume control is motorized.

By using a motor to physically move the con-

trol knob, a new level of remote control

adjustability is achieved.

Regardless of where the master volume con-

trol is set on the amplifier, the remote can

move it up or down. Since the remote control

signal is now the drive signal to the motor,

noise on the remote control leads cannot mix

in with the amplifier signals. This gives the

Power Vector a fully functional and clean way

of remotely controlling overall system level.

Traditionally, remote volume control was ac-

complished by having the remote control

vary an analog control signal to an opto-

resistor in the amplifier. This opto-resistor

would further attenuate the signal level in the

amplifier, based on the remote control setting.

This approach has two drawbacks: (1) the

maximum volume that can be achieved by

changing the remote control was limited by

the master volume control setting on the

amplifier, or vice-versa depending on how

the amplifier was designed, the remote

could lower volume, but could not further in-

crease it; (2) the control signal, because it is

analog, is vulnerable to noise. If a 60 Hz

hum was picked up by the long remote

volume leads, it could cause the opto-

resistor to modulate the volume level at the

hum frequency.

PVSC

Power Vector

Security Cover

RVCP

Remote Volume

Control Panel

RPK87

Rack

Mounting Kit

PVMC

Module

Security

Cover

Power Vector Modular Amplifiers

V35, V60, V100, V150, V250

Bogen's Power Vector modular input amplifier series offers a wide range of

power levels from which to choose, with five models ranging from 35W to 250W.

The amplifiers are designed to work with both high- (70V/25V) and low- (4/8-ohm)

impedance speaker systems. Each model includes eight module bays for input

modules and allows up to four levels of priority between modules. Two module bays

are also capable of accepting signal-processing output modules. Each input channel

has an associated signal/clip LED for signal status. An 11-segment LED output meter

monitors output signal level, which can be controlled by the Remote Volume

Control Panel (RVCP, sold separately). Modules required, but sold separately.

WALL-MOUNTABLE

version

on Page 40

MIXER

version

on Page 48

Product Features:

• 5 models ranging from 35W to 250W, each

with a large power reserve

• Capable of handling 70V, 25V, 8-ohm,

and 4-ohm speaker loads

• 8 input module bays (modules sold

separately)

• Wide selection of advanced input modules

•

2 module bays capable of handling signal-

processing output modules

• 4 levels of priority between modules

• 11-segment LED output level meter with

Average and Peak switch

• Motorized master volume control that can

be remotely operated (requires RVCP)

• Bass and treble controls

• Two-color LED for each channel indicates

signal active/signal clipping

• Lockable switch permits user to select

either transformer-coupled outputs or

a direct low-impedance output

• Master mute control mutes all audio from

the mixer section of the amplifier

• Bass and treble control bypass switch

• 125 Hz Low Cut feature

• 2 rack spaces high (3-1/2")

• Listed to UL Standard 60065

for US and Canada

• Signal-processing insert jacks allow exter-

nal equipment to be inserted between the

pre-amp output and the power amp input

• Pre-EQ unbalanced buffer output signal

“post” all unit controls, but “pre” any exter-

nal signal-processing equipment connected

• Grounded, unswitched AC convenience

receptacle with a 500W maximum capacity

provided for external equipment

• Security cover to protect volume, bass, and

treble controls (PVSC, sold separately)

• Module security cover prevents tampering

with module controls (PVMC, 8 included)

• Rack mountable (mounting kit RPK87,

sold separately)

Technical Specifications, Dimensions,

and Weights can be found on Page 79

ALL MODULES

SOLD SEPARATELY

Input & Signal

Processing Modules-

See Pages 39 & 40

MODULES

www.bogen.com

AMPLIFIERS

MODULAR AMPLIFIERS

Rear View

1 2 3 4 5 6 ... 12 13

Inhaltsverzeichnis

Seite 1 - MODULAR AMPLIFIERS

AccessoriesSignal-Processing ModulesWhen signal-processing output modules areinstalled into the Power Vector's lasttwo module bays, they automati

Seite 2 - ADVANCED INPUT MODULES

AccessoriesWhat Does The Pro-Matrix Do?The Pro-Matrix Amplifier is ideally suitedfor restaurants and similar venues.It provides 4 AUX and 2 MIC inputs

Seite 3 - ADVANCED OUTPUT MODULES

ALL MODULESSOLD SEPARATELYAccessoriesFlexible Output LevelsThe VMIX was designed to make connec-tions to other sound system components aseasy as possi

Seite 4 - PUBLIC ADDRESS AMPLIFIERS

Product Features:• 8 independently assignable inputs• Dual-bus design with Main/AUX output selectorfor each input• Pluggable terminal strip connection

Seite 5 - UTILITY AMPLIFIERS

The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the numberof inputs on Bogen or othe

Seite 6 - TELEPHONE PAGING AMPLIFIERS

BRIDGING INPUT - BRG1RDaisy Chain Multiple Amplifier Inputs• Gain/Trim control• Ground isolated input to eliminate ground loop• Input signal available

Seite 7 - DUAL-CHANNEL POWER AMPLIFIERS

AccessoriesRVCPRemote VolumeControl PanelAccessoriesANS500MSensor Microphone(One included; additional available)ComponentsBBFFlush-MountBack BoxBBSSur

Seite 8

Dual Band EQThe unique dual-function equalizer can beused for acoustic shaping or for feedbackcontrol.• Acoustic Shaping - Full range equaliza-tion is

Seite 9 - MONO-CHANNEL POWER AMPLIFIER

Utility AmplifierGA6AUtility AmplifierGA2Product Features:• 6-watt utility amplifier• 2 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z)• 8-ohm, 25V, or 70V outputs

Seite 10 - PRO-MATRIX AMPLIFIER

AccessoriesSpecialized Telephone InputThe TPU-Series’ 600-ohm transformer bal-anced input is perfectly suited to connect topaging ports and paging ada

Seite 11 - MODULAR MIXER

Product Features:• Dual 70V amplifier channels• 300W, 450W, or 600W per channel for 70V speaker systems• Low noise, low distortion, and high slew rate

Seite 12 - MIC/LINE Mixer

Modular AmplifierThe M-Class Series of amplifiers are mod-ular amps that can accept up to two inputmodules per unit. These modules offer acost effecti

Seite 13 - CAM MIXERS SELECTION CHART

Product Features:• 125- and 250-watt models• Convection-cooled• Power MOSFET output circuitry• Thermal protection and automaticelectronic overload pro

Weitere Dokumente für Audiomischer Bogen CAM8PRO

Um das Dokument anzuzeigen Bogen CAM8PRO Spezifikationen

Bogen CAM8PRO Spezifikationen (24 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Bogen CAM8PRO Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audiomischer Bogen CAM8PRO herunter. Bogen Catalog 108 - Wire Supplies, Inc. [en] Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Audiomischer Bogen CAM8PRO

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Bogen CAM8PRO