Bogen MVP810BG Bedienungsanleitung PDF herunterladen

UTI1 shown with optional

rack mount / security cover kit

Programmable AUX Relay

The UTI1 provides a way for in-

stallers to decide how the AUX

relay contacts will trip based on

which inputs on the UTI1 are ac-

tive. The UTI1 has 4 inputs:

override, tone trigger, paging,

and night ring. The installer can

program the AUX relay to re-

spond to one or any combination

of these inputs. The UTI1 priori-

tizes these inputs (in the order

shown above) so that higher pri-

ority inputs preempt lower ones,

but the AUX relay contacts can be

programmed to work independ-

ently of this hierarchy.

For example, the AUX relay could

be programmed to respond only

to a night ring trigger independent

of anything else the UTI1 was

doing. The UTI1 would suppress

the night ring tone if a general

page were made; however with

the AUX relay programmed this

way, the AUX relay contacts

would remain active until the

night ring input stopped regard-

less of the other UTI1 inputs.

The AUX relay contacts can also

be programmed to operate after

the triggering event has finished.

In this case, the AUX relay contact

activates for 1 second and then

stops. This type of operation allows

external equipment to be triggered

after an event has occurred.

All this selectable functionality

allows the installer improved

ways to control external equip-

ment in conjunction with the

UTI1 operation. Programming is

accomplished through simple

DTMF programming codes.

Accessories

RPKUTI1

Security Cover & Rack Mount Kit

(sold as a set)

Single-Zone Universal Telephone

Interface

UTI1

Product Features:

Power

Dimensions

Product

Requirements Weight

120V AC,

12-1/4" W X 5-1/4" H X 2-1/2" D

5 lb.

0.5A (without rack mount kit)

Bogen’s UTI1 is a single-zone telephone interface that is compatible with all standard analog

port types. A background music (BGM) input with variable muting coordinates music and

page announcements. An additional audio output provides a “page only” function

(no BGM) for application flexibility. A built-in 24V DC, 1A power supply is provided for pow-

ering amplified speakers. Paging volume controls are provided for each of the outputs. An out-

put limiter function, with limiter active indicator, provides consistent page volume regardless

of loud or soft paging announcements. Contact-triggered tones and night ring signals, as

well as programmable AUX relay contacts, are all programmed using DTMF tones through the

dual-purpose override input. Plug-in terminal strips provide for easy installation. An optional

security cover/rack mount kit (RPKUTI1) is available.

• Emergency override & general paging

• One-way paging only

• Interfaces to Loop Start, Ground Start,

Analog Station, and Page Ports (with

or without contact closure activation)

• Simple 2-switch interface setup

• Background music (BGM) input with level

control and variable muting

• Separate Page & BGM and Page Only

(no BGM) outputs

• Level control for each output

• 24V DC, 1A power supply

•

150 Speaker T/R drive capacity per output

• Page level limiter with active indicator

• Adjustable automatic level control

• Override input (loop start or page port)

• Contact-triggered Night Ring input

• Programmable AUX Relay

• Pre-announce/confirmation tone

• Tone burst (2 to 7 sec), chime,

and slow whoop tone selections

• Microcontroller operated, DTMF

programmable

• Night ring tone or chime selection

• Setup test tone

• Pluggable terminal strip connectors

• Programming through override jack

• Programmable timeout for station mode

• Programmable trunk port timeout

• Responds to CPC disconnect signal

• Wall-mount design

•

Rack-mountable with RPKUTI1 kit (optional)

• FCC Part 68 Registered

• Listed to UL Standard 60950

for US and Canada

UTI1 Control Panel

SINGLE-ZONE TELEPHONE INTERFACE

www.bogen.com

PAGING CONTROL

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - PAGING CONTROL

UTI1 shown with optionalrack mount / security cover kitProgrammable AUX RelayThe UTI1 provides a way for in-stallers to decide how the AUXrelay contac

Seite 2 - TELEPHONE INTERFACE

Product Features:• Loop start, ground start, and station port(90V ring up) compatibility• 600-ohm output• Built-in confirmation tone indicating access

Seite 3

• Expandable from 3 to 12 zones (in 3 zoneincrements using ZX3 modules; one ZX3module included)• One-way paging only• Interfaces to Loop Start, Ground

Seite 4 - PAGING CONTROL MODULES

Paging SystemPCM2000Product Features:PCM2000Modules Required For Zone Paging Applications:*Note: One PCMPS2 Power Supply (not included) is required fo

Seite 5

Time Tones*:• Built-in real-time clock• Controls up to 8 time-triggered tone-signaled events• Each time-triggered event’s tone can be directed to a sp

Seite 6 - ZONE CONTROL MODULE

Product Features:• 3-Zone paging plus All-Call• 3 easily programmable zone groups (1-3 zones in each)• One-way and two-way paging (talk back operation

Seite 7 - VOIP GATEWAYS FOR PAGING

Product Features:• Ethernet connectivity and full IP compatibility withexisting routers and WAN infrastructure • Single- or multi-zone paging at any o

Kommentare zu diesen Handbüchern

Keine Kommentare

Bogen MVP810BG Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gateways / Controller Bogen MVP810BG herunter. Bogen Catalog 108 - Wire Supplies, Inc. [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Bogen MVP810BG